Install an Ingenico PIN Pad
Hardware Setup Wizard | Compatible PIN pads
This procedure is for installing Ingenico PIN pads, models 3070/2100/3010, for use with the QuickBooks POS Merchant Service.
To install the PIN pad:
Make sure the Point of Sale installation disk is in your CD-ROM drive. (Cancel the Installation Wizard if it launches.)
Launch Point of Sale.
From the File menu, select Hardware Setup Wizard.
Follow the on-screen instructions to connect and setup your PIN pad. What does the USB cable look like?
Troubleshooting Tips:
If Windows does not automatically detect the hardware, make sure the unit is receiving power (the screen will be active) and plugged in correctly. You can also try unplugging the USB end of the cable, waiting a moment and then plugging it back in.
If your device is not installed automatically, you can install the driver by browsing to the \Drivers\Ingenico folder on the Point of Sale CD.
To review or change your preferences in Point of Sale:
Select Preferences Workstation from the File menu.
Select PIN pads from the left-hand preferences list.
Select your model of Ingenico PIN pad:
Ingenico 3070 (with integrated card reader)
Ingenico 2100 (with integrated card reader)
Ingenico 3010 (without card reader)
Select the test button at the bottom of the window to verify the operation of your device.
Select Save.