Select Hardware Setup Wizard from the File menu.
Follow the on-screen instructions to connect and setup your printer. Do not connect your hardware until instructed to do so. What does the USB cable look like?
Install a Star TSP100/TSP600 Receipt Printer (USB)
Hardware Setup Wizard | Print FAQs
It is strongly recommended that you use the Hardware Setup Wizard to configure your Point of Sale hardware. You can access the setup wizard from the File menu and from individual hardware workstation preferences pages.
Note: If you have previously installed a Star TSP600-Series Parallel version of this printer on this workstation and no longer plan to use it, we recommend you delete it from your Windows printer list before continuing. This will help avoid printer driver conflicts. How do I?
To set up your Star TSP100-Series or TSP600 Series USB printer:
Insert your Point of Sale CD into your CD-ROM drive. If the installation wizard launches because of this, select No to cancel.
Take the power supply cord and place one end in the back of the receipt printer and the other into a power source. Turn the printer power on.
Select Hardware Setup Wizard from the File menu.
Follow the on-screen instructions to connect and setup your printer. Do not connect your hardware until instructed to do so. What does the USB cable look like?
To review or change your printer preferences in Point of Sale:
From the Point of Sale File menu, select Preferences Workstation, and then select Documents & Printers from the left-side preferences list.
Make the following selections:
Select the Star TSP100 or TSP600 (as appropriate) for each of the documents you want to print with this printer, e.g. Sales Receipts, X/Z-Out Reports, etc.
Select an appropriate 40-column template for each of these document types.
Select Print Options from the left-side menu.
Make choices for the various options available.
Select Save.