Position and Align Elements
Print Designer Overview | Print Designer FAQs
Pro
Elements can be positioned on the template by any or a combination of these methods:
Drag and drop the element; use this method to approximately place the element in the desired position and then use the options below for more precise alignment
Use the arrow keys on your keyboard to move the selected element in small incremental steps or <Ctrl + arrow keys> to move in 10X larger increments
Use the tool bar alignment options (see below) to position elements relative to other fields or relative to the section in which it is placed
Use the top and side rulers, status bar coordinates, and snap overlapping objects to their edges options with any of the above to help with precise placement
Using the Alignment Options
The alignment options allow you to align selected elements to another element or to the section in which it is placed. When aligning to another element, the first element selected is referred to as the "anchor element." Other selected elements will be oriented to the position of the anchor element according to the alignment option selected.
To apply an alignment option:
Select the element or elements you wish to align.
To select multiple elements, hold down the <Shift> key and click on each element in turn or by dragging the mouse to encompass all elements to be selected. The first element selected is the anchor element when aligning elements relative to each other.
From the toolbar, select Align and then select Align Fields to Each Other or Align Fields to Section.
The align fields to each other option is available only if multiple elements have been selected.
From the drop-down menu displayed, select the specific alignment option:
You can also select Show Align Toolbar from the Align menu to add the alignment tools to the toolbar.
|
Alignment Options: |
Fields to each other |
Fields to |
|
Align Left |
Aligns the left edge of all selected elements with the left edge of the anchor element |
Aligns left edge of selected element(s) to the left edge of the section |
|
Align Right |
Aligns the right edge of all selected elements with the right edge of the anchor element |
Aligns the right edge of all selected element(s) with the right edge of the section |
|
Align Bottom |
Aligns the bottom edge of all selected elements with the bottom edge of the anchor element |
Aligns the bottom edge of all selected element(s) with the bottom edge of the section |
|
Align Vertical Center |
Aligns the vertical center of all selected elements with the vertical center of the anchor element |
Vertically centers the selected element(s) within the section |
|
Align Horizontal Center |
Aligns the horizontal center of the selected elements with the horizontal center of the anchor element |
Horizontally centers the selected element(s) within the section |
|
Make Same Width |
Makes the width of selected elements the same as the width of the anchor element |
Makes the selected element(s) the same width as the section |
|
Equal Horizontal Space |
Evenly distribute the horizontal spacing between selected elements |
n.a. |
|
Equal Vertical Space |
Evenly distribute the vertical space between selected elements |
n.a. |
Moving Elements between Sections
You cannot move an element directly from one template section to another. If you need to move an element to another section, first remove it from one section and then add it to the other.