Install a Welch Allyn IT3220 or HHP Imageteam 3800 Bar Code Scanner
Hardware Setup Wizard | Compatible Bar Code Scanners
It is strongly recommended that you use the Hardware Setup Wizard to configure your Point of Sale hardware. You can access the setup wizard from the File menu and from individual hardware workstation preferences pages.
To install the bar code reader:
Make sure the Point of Sale installation disk is in your CD-ROM drive. (Cancel the Installation Wizard if it launches.)
Launch Point of Sale.
Select Hardware Setup Wizard from the File menu.
Follow the on-screen instructions to connect and setup your bar code scanner.
USB Connection
Connect the USB cable from the bar code scanner into an available USB port on your computer. No other setup is required.
What does a USB cable and port look like?
PS/2 Connection
Both the bar code scanner and, if used, the PS/2 credit card reader, are installed between the keyboard and the computer.
The illustration below includes both of these pieces of hardware. If you are installing only one of these pieces, just bypass the one not used.
Cable 3 connects to a PS/2 (keyboard) port on your computer.
