Install a Logic Controls LD9900 (USB) Pole Display

Hardware Setup Wizard | Compatible Pole Displays | FAQs

 

Use this procedure to install and configure the Logic Controls LD9900 pole display for use with Point of Sale.

It is strongly recommended that you use the Hardware Setup Wizard to configure your Point of Sale hardware. You can access the setup wizard from the File menu and from individual hardware workstation preferences pages.

To install the Pole Display to your Computer:

  1. Assemble the pole display (connect base, pole and display as depicted in the pole display documentation).

  2. Make sure the Point of Sale installation disk is in your CD-ROM drive. (Cancel the Installation Wizard if it launches.)

  3. Launch Point of Sale.

  4. Select Hardware Setup Wizard from the File menu.

  5. Follow the on-screen instructions to connect and setup your pole display.  What does the USB cable look like?Click to display a popup topic

 

To review or change your preferences in Point of Sale:

  1. Start Point of Sale.

  2. From the File menu, select Preferences Workstation.

  3. Select Equipment Customer Pole Display on the left-side preferences list.

  4. Complete settings for the pole display as described here.

  5. Select Save.

Test your pole display when done.